Guilin Hengda HD-2500 Super Grinding Equipment

Features of super large mill

1. Reduce the grinding roller, reduce the vibration and increase the output: according to the grinding conditions of various types of machines, if the grinding force is enough, the grinding roller can be reduced and the grinding space can be increased. The material layer between the grinding roller and the grinding ring is well filled, so as to reduce the wear of the grinding roller and the grinding ring, and reduce the vibration and noise. At the same time, the resistance of the fan air flow becomes smaller, the wind direction flows smoothly, which greatly increases the air volume. It plays a decisive role in increasing yield. The output is 20-30% higher than that of traditional R-Raymond mill.

2. The grinding roller linkage pressurization technology can enhance the grinding capacity and increase the output by 20% under the same power.

3. The original strong sealing roller assembly can increase the oil filling time by 6-15 times, and realize the oil filling once every 30-45 days.

4. High efficiency and stability: the grinding roller and the grinding ring are always in contact during the operation, so as to improve the grinding efficiency and reliability.

5. High accuracy of powder classification, no coarse: frequency conversion turbine classifier, classification accuracy of 80-600 mesh, classification efficiency of 99%, stable and adjustable powder selection. Compared with the vane type, the efficiency of powder separation and the qualified rate of final product are greatly improved.

6. High efficiency and energy saving centrifugal fan: the fan plays an important role in the whole operation process of the mill. HD series swing mill adopts high-efficiency energy-saving impeller fan, and its efficiency is greatly improved than that of straight blade type.

7. Low noise and low vibration: compared with peers, HD series pendulum mill has the characteristics of high output, high qualified rate, low vibration and low noise in grinding 325-400 mesh range.

Main Technical Parameters: