Guilin Hengda 5R4128 Improved Mill

Product features:

The output of this machine is 20% higher than that of sr4119 and 80% - 100% higher than that of 9720

The machine has the following features:

1. The reducer adopts a new type of reducer: the speed of the main engine can be adjusted according to the different working conditions to adapt to the materials with different hardness.

2. Large amount of shovel material: use larger blade to send material to the middle of grinding roller and grinding ring

3. Advanced structure of the main engine: the structural design of the cover cylinder of the main engine ensures stable operation and low noise; the quick change pressing device is adopted for the host and the analyzer, which is convenient for maintenance. The base of the main engine is raised, the grinding rod and the grinding ring are raised to 280mm, so that the grinding area is increased.

4. High classification accuracy: it adopts super large classification turbine with high passing rate and large air volume. In addition, the seal blade end face of the grading impeller and the seal end face of the powder outlet form a palace type seal, which is not easy to form short circuit powder and has high classification accuracy.

5. Arc non resistance air duct: the air duct adopts arc-shaped non resistance air duct design, which can reduce air resistance and air loss, make the material flow well and increase the powder selection rate of analyzer.

6. New type of roller grinding device: the grinding roller device adopts new strong sealing structure, with reliable sealing, and its bearings are lubricated by oil, with low oil consumption and low maintenance cost.

7. Large conveying capacity: the blower adopts high-pressure centrifugal fan, and the air volume and air pressure increase, which greatly improves the pneumatic conveying capacity.

8. The residual air is collected with cloth bag without dust if dyeing.

Main Technical Parameters: